VAB-800

  • 10cm x 7.2cm超小型Pico-ITX主板
  • 搭载800MHz NXP i.MX537 Cortex-A8处理器
  • 支持-40°C ~ 85°C宽温工作
  • 支持双CAN总线及双COM接口
  • 提供Linux及Android软件开发包(BSP),包含威盛Smart ETK软件工具包,加快产品开发

概述

威盛VAB-800 Pico-ITX ARM主機板

威盛VAB-800主機板搭載800MHz NXP Cortex-A8 ARM處理器,擁有先進的多媒體效能、豐富的I/O界面、低功耗、寬溫工作等特性,可為各種人機界面(HMI)、工業自動化、能源管理及車載應用等領域提供靈活、可靠的解決方案。


硬體

威盛VAB-800基於超小型Pico-ITX主機板,尺寸僅為10 cm x 7.2 cm,可提供豐富的I/O界面和連接效能。

軟體

威盛VAB-800 Android評估套件(EVK)提供Android 2.3及包含多個應用程序界面的威盛Smart ETK軟體套件,其中包括防止系統崩潰的Watchdog定時器(WDT)、GPIO界面、COM界面、RTC自動電源喚醒及1個例程應用。

威盛VAB-800 Linux 評估套件(EVK)預置Ubuntu image,包括內核及啓動加載器原始碼。其他效能包括1個Tool Chain,幫助調整內核,管理板載排針、GPIO界面、I2C界面及其他硬體特性。

同時還提供一套完整的軟體客制化服務,幫助客戶加快產品上市時間,降低開發成本。

擴充性

VAB-820主機板可進一步整合可選的高速USB Wi-Fi模組。

應用

VAB-800主機板支援-40°C ~ 85°C(工業級型號)寬溫工作,最高5瓦的低功耗設計,可為各種嚴苛環境中打造堅固、可靠的平臺。

解決方案

威盛AMOS-800是基於VAB-800主機板的一款完整的堅固型系統解決方案。

AMOS-800 45deg


數據資料

取得PDF版本之VAB_800規格書,或瀏覽以下訊息:

Model NameVAB-800
Processor800MHz NXP i.MX537 Cortex-A8 SoC
System Memory1GB DDR3 SDRAM onboard
Storage4GB eMMC Flash memory
GraphicsAMD Z430 GPU
2 integrated, independent 3D/2D graphics processing units
Graphics engine supporting OpenGL® ES 2.0 and OpenVG™ 1.1 hardware acceleration
Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p
LANSMSC LAN8720A 10/100 PHY transceiver with HP Auto-MDIX support
AudioNXP SGTL5000 low power stereo codec
HDMISilicon Image SiI9024A HDMI transmitter
USBSMSC USB2514 USB 2.0 high speed 4-port hub controllers
CANTI SN65HVD1050 EMC optimized CAN transceiver
Onboard I/O1 SATA connector with voltage select jumper for DOM
1 SATA power supply connector for 2.5" HDD/SSD
1 Miscellaneous pin header for 2 USB 2.0 ports, 1 USB device port, 2 CAN bus ports, system power-on and reset
2 COM port connectors with power supply (one supports 8-wire DCE mode, another supports 2-wire for debug)
1 Miscellaneous pin header for 4-wire resistive touch screen interface, I2C and Digital I/O (4 GPI + 4 GPO)
2 Single-channel 18/24-bit LVDS panel connectors
1 Micro SD card slot
1 RTC battery connector
1 JTAG pin header (for debugging)
1 Boot Flash select pin header for eMMC or SD
1 Front audio pin header for Line-in, Line-out, Mic-in
1 DC-in connector
Back Panel I/O2 USB 2.0 ports
1 Mini HDMI port
1 VGA port
1 10/100M Ethernet port
Watch Dog TimerIntegrated watch dog timer supports two comparison points. Each comparison point can interrupt ARM core, 2nd comparison point capable of generating external interrupts on WDOG line
Power Supply5V DC-in
Operating SystemAndroid 2.3, Linux Kernel 2.6.35, WEC7
Operating TemperatureCommercial grade: 0°C to 60°C
Industrial grade: -40°C to 85°C (optional)
Operating Humidity0% ~ 95% (non-condensing)
Form FactorPico-ITX (10cm x 7.2cm, 3.9" x 2.8")

下載

VAB-800 文件

文件版本日期
用戶手冊v1.042014-12-16
快速入門手冊v1.022013-03-11
Linux 開發指南 for BSP v1.4.8v1.042014-12-26

VAB-800 軟體下載

軟體版本日期
Android
Android 2.3 Board Support Package (BSP) (272.8MB)v1.3.32015-02-13
Android 2.3 Evaluation Kit (EVK) (270MB)v1.3.32015-02-13
Linux
Linux Board Support Package (BSP) (1GB)v1.4.82014-09-23
Linux Evaluation Kit (EVK) (87MB)v1.4.82014-09-23
Linux Evaluation Kit with QT Embedded (949MB)v1.0.12013-04-25
注意: 下載這些軟體套件,即表示您接受威盛軟體使用協議。若是您不同意任何條款及條件,請不要繼續下載該軟體。

 

  • U-Boot version: 2009.08
  • Kernel version: 2.6.35
  • Evaluation image: Android Gingerbread  2.3
  • Development based on NXP Android BSP r10.3
  • Support eMMC as default boot device
  • Support Mini HDMI, VGA, LVDS single display
  • Support Mini HDMI audio output
  • Support display auto detection for either HDMI or VGA
  • Support 2 LVDS single channel ports
  • Support AUO LVDS resistive touch panel (through 4-wire interface)
    • AUO 7″ G070VW01 (800×480)
  • Support COM1 DCE mode, COM2 as debug port in default
  • Support 2 FlexCAN TX/RX
  • Support 10M/100M Ethernet
  • Support Ethernet static IP configuration
  • Support Line-in, Line-out, Mic-in
  • Support EMIO-1533 USB Wi-Fi module
  • Support VNT9271 USB Wi-Fi dongle
  • Support Watchdog and GPIO
  • U-Boot version: 2009.08
  • Kernel version: 2.6.35
  • Evaluation demo image: Ubuntu 10.04
  • Developed based on NXP Linux BSP 11.09.01
  • Support eMMC and Micro SD boot
  • Support Mini HDMI, VGA, LVDS single display
  • Support Mini HDMI audio output
  • Support display auto detection for either HDMI or VGA
  • Support dual display: HDMI+VGA, LVDS1+VGA, HDMI+LVDS2, or LVDS1+LVDS2
    • Clone and extend mode supported
  • Support 2 LVDS single channel ports
  • Support AUO LVDS resistive touch panel (through 4-wire interface)
    • AUO 7″ G070VW01 (800×480)
  • Support XRandR
  • Support COM1 DCE mode, COM2 as debug port
  • Support 2 FlexCAN TX/RX
  • Support 10M/100M Ethernet
  • Support Line-in, Line-out, Mic-in
  • Support EMIO-1533 USB Wi-Fi module
  • Support VNT9271 USB Wi-Fi dongle
  • Support Watchdog and GPIO
  • U-Boot version: 2009.08
  • Kernel version: 2.6.35
  • Evaluation image: Ubuntu 10.04
  • Development based on NXP Linux BSP 11.09.01
  • Support eMMC and Micro SD boot
  • Support Mini HDMI, VGA single display
  • Support display auto detection for either HDMI or VGA
  • Support Mini HDMI audio output
  • Support 10M/100M Ethernet
  • Support 3D and video HW acceleration on QT Embedded v4.8.2

訂購

VAB-800 訂購資訊

零件編號SoC描述
VAB-800
Commercial Grade:
10GZ9084000A0
NXP i.MX537 @ 800MHzPico-ITX board with 800MHz NXP Cortex-A8 SoC, 4GB eMMC, 1GB DDR3 SDRAM, VGA, mini-HDMI, 2 LVDS, 5 USB 2.0, 2 COM, 10/100Mbps Ethernet, SATA, CAN bus, 5V DC-in

包裝清單: VAB-800 board, DC power cable, debug COM cable, audio cable, 2-port USB cable
VAB-800
Industrial Grade:
10GZ9084400A0

VAB-800 無線模組

零件編號描述
EMIO-1533-00A2
VNT9271 IEEE 802.11 b/g/n USB Wi-Fi module with assembly kit

聯絡我們

國家

威盛電子股份有限公司