- 800MHz VIA Cortex-A9 SoC
- High-performance external antennas
- Ethernet and KNX-TP connectivity support
- Cross protocol wireless home router for multi-device management
- Multi-protocol wireless connectivity including Wi-Fi, Bluetooth, ZigBee, Z-Wave, and KNX-RF
- OCF IoTivity Certification
VIA Alegro 100 OCF Certified Multiprotocol Home Gateway Router
The VIA Alegro 100 home gateway router is a flexible low-power turnkey solution with advanced multiprotocol wireless integration capabilities that is easily customizable for a wide variety of home and building automation and security applications. It is an Open Connectivity Foundation (OCF) certified device.
Combining 800MHz VIA Cortex-A9 SoC with high-performance external antennas and advanced multi-protocol wireless integration capabilities, the VIA Alegro 100 is an ideal solution for home and building environments. The system chassis can be customized to meet the requirements of the target usage scenario and environment.
A choice of Linux and Android BSPs supported by advanced software development tools and services minimizes system development costs and accelerates time to market.
With its flexible modular architecture, the VIA Alegro 100 can be configured to support all the most popular wireless protocols, including Bluetooth, ZigBee, Z-Wave, KNX-TP, KNX-RF, Wi-Fi, and Ethernet – enabling seamless bidirectional connectivity to a plethora of smart devices and appliances.
The VIA Alegro 100 multiprotocol home gateway router is is easily customizable for a wide variety of home and building automation and security applications.
Get the PDF version of the Alegro 100 datasheet, or browse the information below:
|Model Name||Alegro 100|
|Processor||800MHz VIA Cortex - A9 SoC|
|System Memory||512MB DDR3 SDRAM onboard|
|Storage||4GB eMMC Flash memory|
|Boot Loader||512KB SPI Flash ROM|
|LAN||VIA VT6113 10/100 base-TX PHY chip|
|KNX-TP||Siemens KNX EIB TP -UART2 KNX transiver|
|KNX-RF||Radiocrafts RC1180 - KNX2 KNX- RF module|
|ZigBee||Silicon Labs EM3581 ZigBee controller|
|Z-Wave||Sigma Designs ZM5304 Z-Wave module|
|Front Panel I/O||1 Power on / off button & power indicator LED|
|Back Panel I/O||1 USB 2.0 ports
1 10/100Mbps Ethernet port
1 KNX-TP connector
1 DC- in jack
|Power Supply||12 ~ 24V DC- in|
|Operating System||Android 4.0, Linux kernel 3.0.8|
|Mechanical Construction||Plastic chassis|
|Mounting||Built-in wall mountable holes
Optional VESA mounting bracket ( 75mm x 75mm)
Optional DIN Rail kit
|Operating Temperature||0°C ~ 50°C|
|Operating Humidity||0% ~ 90% @ 40°C ( non-condensing )|
|Storage Temperature||-20°C ~ 70°C|
|Dimensions||171.4mm(W) x 28.4mm(H) x 114.7mm(D) (6.73” x 1.1” x 4.51” )|