VIA HMI Panel Display Starter Kit
The VIA HMI Panel Display Starter Kit is the result of our experience of working with clients from all around the world on the design and development of all-in-one digital signage systems. The VIA HMI Panel Display Kit provides a reliable and affordable solution for accelerating the development of all-in-one streaming devices. Its Linux BSP is optimized to enable modern, HTML5-based digital signage applications, and includes hardware-accelerated video decoding in the Chromium browser.
The VIA VTS-8588 board is powered by a 1.0GHz VIA Cortex-A9 dual-core SoC with a dedicated graphics processor to ensure low power consumption and stunning performance for digital signage applications with extended uptime.
The board comes with onboard Wi-Fi and 10/100Mbps Ethernet with Power-over-Ethernet (PoE) support that helps to reduce or eliminate cabling and increases reliability. Other features include two USB 2.0 ports, one dual-channel LVDS connector, one PWM backlight controller, one COM (TX/RX) console connector, four GPIO, and one Micro SD card slot.
The kit’s BSP uses Ubuntu Linux 14.04, which has a wide user base and community support network. The BSP has been designed to enable modern HTML5-based digital signage applications, and includes hardware-accelerated video decoding in the Chromium browser. Further software customization services are also available upon request.
The kit includes an optional 17″ LVDS LCD display that has been validated for use with the VIA VTS-8588 board to accelerate product development and manufacturing. Additional hardware customization services are also available on request.
To learn more, download your copy of the VIA HMI Panel Display Starter Kit brochure.
Get the PDF version of the VTS-8588 datasheet, or browse the information below:
|Processor||1.0GHz VIA Cortex-A9 dual-core SoC|
|System Memory||1GB DDR3 SDRAM|
|Storage||8GB eMMC Flash memory|
|Bootloader||512KB SPI Flash ROM|
|Graphics||Mali-400 dual processor GPU
2 integrated, independent 3D/2D graphics processing units
Graphics engine supporting OpenGL® ES 2.0 hardware acceleration
Supports MPEG-2 and H.264 video decoding up to 1080p
|LAN||Realtek RTL8152B 10/100Mbps Ethernet controller|
|Wi-Fi||Realtek RTL8189ES SDIO onboard Wi-Fi module|
|Onboard I/O||1 Dual-channel LVDS connector
1 PWM LVDS backlight control connector
1 COM (TX/RX) Console connector
1 DC-in connector
|Rear I/O||2 USB 2.0 ports
1 10/100Mbps Ethernet port with 48V PoE
1 Micro SD card slot
|Operating System||Linux kernel 3.4.5|
|Power Supply||12V DC-in|
|Operating Temperature||0°C ~ 45°C|
|Operating Humidity||0% ~ 90% (relative humidity; non-condensing)|
|Form Factor||14cm x 11.5cm (5.51" x 4.52")|
|User Manual||v1.00||2016 04 26|
VTS-8588 Ordering Information
|00GFJ10600020||VIA Cortex-A9 dual-core|
SoC @ 1.0GHz
|VTS-8588 board with 1.0GHz VIA Cortex-A9 SoC, 8GB eMMC, 512KB SPI Flash ROM, 1GB DDR3 SDRAM, LVDS, 2 USB 2.0, 4 GPIO, 10/100Mbps Ethernet with PoE, onboard Wi-Fi, Micro SD card slot, 12V DC-in|
|99G47-020501||17” LVDS LCD panel (1280x1024px resolution)|
*Disclaimer for California, USA: Perchlorate Material – Special handling may apply. Visit https://dtsc.ca.gov/perchlorate/ for more information.