VIA HMI Touch Panel Starter Kit
The VIA HMI Touch Panel Starter Kit has grown out of our experience of working with clients from all around the world on the design and development of in-vehicle entertainment and user-interactive signage systems. It comprises a highly-integrated VIA ENT-610M board plus an optional 10.1” LVDS projective capacitive touch screen and an optional EMIO-1533 USB Wi-Fi module, to provide a reliable and affordable solution for accelerating the development of all-in-one smart display devices. An optimized Android 4.2 BSP facilitates the development of customized touch-based applications is also available.
The VIA ENT-610M board is powered by a 1.0GHz VIA Cortex A9 dual-core SoC with a dedicated graphics processor to ensure maximum performance for digital signage applications while minimizing power consumption. Optimized for in-vehicle applications, the board supports a wide 9~36 DC-input voltage range. It also includes lockable connectors and rich set of I/O and connectivity features, including up to two USB 2.0 ports, one LVDS connector, one PCAP touch-screen connector, two GPIO connectors for system buttons, one 10/100Mbps Ethernet port, and one line-out audio connector.
The VIA HMI Touch Panel Starter Kit features an Android 4.2 BSP to facilitate the development of customized touch-based applications. The BSP also includes 2D, 3D, and video playback acceleration to optimize graphics performance. Additional software customization services are also available upon request.
Expandability options include the EMIO-1533 USB Wi-Fi module for easy network integration and a 10.1″ projective capacitive touch screen for interactive use. Extra buttons can also be added to the system to enhance user interactions. Additional hardware customization services are also available on request.
With its rich 3D graphics and HD video performance, rich I/O connectivity options, advanced software development tools, and optional display and Wi-Fi module, the Starter Kit provides a flexible solution for accelerating the time to market for Android all-in-one digital signage and in-vehicle touch panel devices.
Get the PDF version of the ENT-610M datasheet, or browse the information below:
|Processor||1.0GHz VIA Cortex-A9 dual-core SoC|
|System Memory||512MB DDR3 SDRAM|
|Storage||4GB eMMC Flash memory|
|Bootloader||4MB SPI Flash ROM|
|Graphics||Mali-400 dual processor GPU
2 integrated, independent 3D/2D graphics processing units
Graphics engine supporting OpenGL® ES 2.0 hardware acceleration
Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p
|LAN||ASIX AX88772CLF USB to 10/100Mbps Ethernet controller|
|Audio||VIA VT1603 SPI Audio Codec|
|Touch Screen||ZEITEC ZET6223WTA Projective capacitive touch screen controller|
|Onboard I/O||1 USB connector for optional USB Wi-Fi module
1 Single-Channel 18/24-bit LVDS panel connector
2 GPIO connectors for system buttons
1 PCAP touch screen connector
1 10/100Mbps Ethernet connector
1 Audio connector (supports Line-out)
1 DC-in connector
|External I/O||1 USB 2.0 port
1 Micro SD card slot
|Operating System||Android 4.2|
|Power Supply||9~36V DC-in|
|Operating Temperature||0°C ~ 45°C|
|Operating Humidity||0% ~ 90% (relative humidity; non-condensing)|
|Form Factor||17.5cm x 12.0cm (6.87" x 4.72")|
|User Manual||v1.00||2016 04 26|
ENT-610M Ordering Information
|10GCX12630020||VIA Cortex-A9 SoC @ 1.0GHz||ENT-610M board with 1.0GHz VIA Cortex-A9 SoC, 4GB eMMC, 512KB SPI Flash ROM, 512MB DDR3 SDRAM, LVDS, Touch screen connector, USB 2.0, 10/100Mbps Ethernet, Micro SD card slot, 9 ~ 36V DC-in|
|LVDS LCD Panel|
|99-47-02033A||10.1" LVDS LCD panel (1024x600) with LVDS cable|
|99-47-030072||10.1" Projective capacitive touch screen with touch screen cable|
|EMIO-1533-00A2||VNT9271 IEEE 802.11 b/g/n USB Wi-Fi module with assembly kit|
*Disclaimer for California, USA: Perchlorate Material – Special handling may apply. Visit https://dtsc.ca.gov/perchlorate/ for more information.