VIA AMOS-825

  • 1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC
  • Intelligent vehicle power management: ACC/IGN on/off delay & power protection
  • Built-in Wi-Fi, Bluetooth and GPS
  • SCSI 50-pin D-sub connector for a single video, audio, and peripheral cable
  • Legacy I/O support including dual CAN bus, COM, and GPIO

Overview

VIA AMOS-825 In-Vehicle Edge Computing System

Enhance commercial fleet safety and efficiency with the VIA AMOS-825 in-vehicle system. Powered by a 1.0GHz NXP i.MX 6Quad Cortex-A9 SoC, this fanless small form factor system has been specifically designed for demanding compute-intensive fleet management,  navigation and infotainment applications.

The low-power VIA AMOS-825 has been optimized for in-vehicle operation with a host of advanced features such as wide voltage input, a wide operating temperature range, sophisticated power management, ignition-controlled quick boot, and dual CAN bus support. The system also features an Android 6.0 EVK package and is Microsoft Azure Certified for IoT.

With its robust and versatile design, the VIA AMOS-825 can be rapidly customized to meet a wide range of smart transportation requirements and has been successfully deployed by the largest taxi company in Japan for its Smart IoT Mobility System.


Hardware

Featuring a 1.0GHz quad core NXP i.MX 6Quad ARM Cortex-A9 SoC, the VIA AMOS-825 delivers a highly-capable and power-efficient system for compute- and multimedia-intensive in-vehicle infotainment and navigation applications.

VIA AMOS-825 In-Vehicle System
A completely fanless system with a ruggedized design, the VIA AMOS-825 measures just 15.5mm (W) x 48.1mm (H) x 103.3mm (D), and supports a wide operating temperature range from 0°C ~ 60°C, a wide voltage input from 9-36V, and ignition-controlled quick boot.

Its highly-efficient design affords an extremely low power consumption of just 7W under typical operation. In addition to 1GB DDR3 memory and 16GB eMMC Flash storage, the system has a rich array of I/O and connectivity features, dual CAN/COM, GPIO, USB 2.0, Gigabit Ethernet, Wi-Fi, Bluetooth, and GPS. Its SCSI 50-pin D-sub connector minimizes the amount of system cabling required.

Software

The VIA AMOS-825 Android EVK package features Android 6.0 as well as the VIA Smart ETK comprising a number of APIs, including Watchdog Timer (WDT) for safeguarding against system crashes, GPIO access, COM port access, RTC for auto-power on, and a sample app. A full set of Android software customization services that speed up time to market and minimize development costs are also available. The VIA AMOS-825 is also Microsoft Azure Certified for IoT.
VIA AMOS-825 is Microsoft Azure Ceritifed

Customization

You can enhance the functionality of the VIA AMOS-825 system with the integration the EMIO-2550 3.75G HSPA/UMTS full-size miniPCIe Mobile Broadband Module. An optional 7″ projective capacitive touch monitor is also available in order to facilitate complete system development.

A full set of hardware and software customization services that speed up time-to-market and minimize development costs is also available.

VIA AMOS-825 In-Vehicle System

Solutions

Combining high performance and low power consumption with a ruggedized ultra-compact design optimized for demanding in-vehicle usage requirements, the VIA AMOS-825 system provides a reliable and versatile solution that can be customized for a wide variety of smart transportation applications.

The system has been successfully deployed by Japan Taxi Co., Ltd for enabling smart taxi applications and services such as navigation, route tracking, driver notifications, passenger pickups, and electronic payments – resulting in increased customer satisfaction and enhanced driver productivity and safety.


Datasheet

VIA AMOS-825 In-Vehicle System
Get the PDF version of the AMOS-825 datasheet, or browse the information below:

Model NameAMOS-825
Processor1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC
System Memory1GB DDR3 SDRAM onboard
Storage16GB eMMC Flash memory
Boot Loader4MB SPI Flash ROM
GraphicsVivante GC2000 GPU
3 independent, integrated 3D/2D and video graphics processing units
Graphics engine supporting OpenGL® ES 2.0, OpenCL and OpenVG™ 1.1 hardware accleration
Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p
Supports SD encoding
LANMicrel KSZ9031RNX Gigabit Ethernet transceiver with RGMII support
Wi-Fi/Bluetooth/GPSIEEE 802.11BGN 1T1R & BT4.0 combo USB module
MAX-7 u-blox 7 GPS/GNSS module
AudioNXP SGTL5000 low power stereo codec
USBSMSC USB2514 USB 2.0 high speed 4-port hub controllers
CANTI SN65HVD1050 EMC optimized CAN transceiver
Expansion I/O1 miniPCIe slot
Front Panel I/O1 Micro USB 2.0 OTG port
1 9-pin D-sub connector (supports 1 CAN Bus and 1 COM TX/RX for debug)
1 SCSI 50-pin D-sub connector (Backlight power, Dual-channel LVDS, 4 GPIO, I2C, Line out and Mic-in)
1 Mic-in
1 Reset button
1 Power & WPAN/WWAN/WLAN LED
1 Antenna hole
1 4-pole Phoenix DC jack
Back Panel I/O2 USB 2.0 ports
1 Gigabit Ethernet port
2 Antenna connectors for Wi-Fi/BT and GPS
Power Supply9 ~ 36V DC-in (typical: 7W)
Operating SystemAndroid 6.0
Watchdog TimerIntegrated watchdog timer supports two comparison points. Each comparison point can interrupt ARM core, 2nd comparison point capable of generating external interrupts on WDOG line.
Operating Temperature0°C ~ 60°C
Operating Humidity0% ~ 90% @ 45°C (non-condensing)
Vibration Loading During OperationWith onboard eMMC
7Grms, IEC 60068-2-64, random, 5 ~ 500Hz, 1hr/axis
Shock During OperationWith onboard eMMC
70G, IEC 60068-2-27, half sine, 11ms duration
Bottom Opening CoversOpen window with removable door plate to access Micro SD and miniPCIe slots
Dimensions150.5mm(W) x 48.1mm(H) x 103.3mm(D) (5.9" x 1.9" x 4.1")
Weight0.673kg (1.48lbs)
ComplianceCE, FCC

Downloads

AMOS-825 Documentation

DocumentVersionDate
User Manualv1.072018-09-27
Android
Android Development Guide for BSP v5.0.3v1.002018-05-31
Android Quick Guide for EVK v5.0.3v1.002018-05-31
Smart ETK SDK Programming Guidev1.012018-05-31
Linux
Linux Development Guide for EVK v3.0.4v1.002018-10-04
Linux Quick Start Guide for BSP v3.0.4v1.002018-10-04

AMOS-825 Software Downloads

SoftwareVersionDate
Android
Android 6.0 Board Support Package (BSP) (488MB)v5.0.32018-05-31
Android 6.0 Evaluation Kit (EVK) (245MB)v5.0.32018-05-31
Linux
Linux Board Support Package (BSP) (4.3GB)v3.0.42018-10-09
Linux Evaluation Kit (EVK) (281.4MB)v3.0.42018-10-09
Important: By downloading these software packages, you indicate your acceptance of the VIA Software License agreement. If you do not agree with any of the terms and conditions, do not continue to download the software.

 

  • U-Boot version: 2015.04
  • Kernel version: 3.14.52
  • Evaluation image: Android Marshmallow 6.0
  • Development based on NXP android_M6.0.1_1.0.0-ga (Android 6.0 Marshmallow)
  • Supports SPI with eMMC boot
  • Supports 7″ Projective capacitive touch monitor (800×480) through I2C interface
  • Supports COM as debug port
  • Supports two FlexCAN TX/RX
  • Supports Gigabit Ethernet
  • Supports Mic-in
  • Supports IEEE 802.11b/g/n Wi-Fi
  • Support Bluetooth 4.0
    • A2DP and SPP profile
  • Supports U-blox MAX-7 GPS/GNSS module
  • Supports EMIO-2550 miniPCIe Mobile Broadband module
  • Supports Smart ETK v1.00: Watchdog timer, UART, and FlexCAN
  • Supports OTA (Over-The-Air technology)
  • Supports shutdown option in Quick Settings
  • Supports Ethernet configuration in Settings

(Bold font highlights the changes in this BSP release)

  • U-Boot version: 2014.04
  • Kernel version: 3.14.28
  • Evaluation image: OpenEmbedded-core built with Yocto 1.7 Dizzy
  • Development based on NXP fsl-yocto-3.14.28_1.0.0 (Yocto 1.7 Dizzy)
  • Supports SPI ROM with eMMC or Micro SD boot (default)
  • Supports 7“ Projective capacitive touch monitor (800 x 480) (through I2C interface)
  • Supports COM as debug port
  • Supports 2 FlexCAN TX/RX
  • Supports Gigabit Ethernet
  • Supports Line-out and Mic-in
  • Supports IEEE 802.11b/g/n Wi-Fi Support
  • Supports Bluetooth 4.0
    • A2DP and SPP profile
  • Supports MAX-7 u-blox 7 GPS/GNSS module
  • Supports EMIO-2550 miniPCIe Mobile Broadband module
  • Supports Watchdog timer and RTC
  • BSP v3.0.4 Bug Fixes and Modifications
    • Added eMMC5.1 support.
    • Fixed bugs.

Ordering

AMOS-825 Ordering Information

Part NumberSoCDescription
AMOS-825-1Q10A2NXP i.MX 6Quad Cortex-A9 @ 1.0GHzFanless embedded system with 1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC, 1GB DDR3 RAM, 16GB eMMC, 4MB SPI Flash ROM, 2 USB 2.0, Micro USB 2.0 OTG port, CAN bus, COM, SCSI 50-pin D-sub connector, GPIO, Gigabit Ethernet, miniPCIe slot, Micro SD card slot, 9~36V DC-in

Packing List: AMOS-825 system, Phoenix plug to DC jack, COM/CAN conversion cable, SCSI 50-pin conntector cable, Screw pack for mounting, Rubber feet pack

AMOS-825 Accessories

Part NumberDescription
99G73-0102297" Projective capacitive touch monitor (800 x 480, -20°C ~ 70°C)
EMIO-2551-00A03.75G HSPA/UMTS mobile broadband full size miniPCIe module with SIM slot
EMIO-2551-01A03.75G HSPA/UMTS mobile broadband full size miniPCIe module with GPS and SIM slot

VIA Technologies, Inc.